If you would like to get a bidet installed in Henderson we can assist. Our friendly installation specialists can look after all your requirements.

Bidet Installation Bay Area

Professional Solution
Quick Feedback Time in San Mateo County, California
Bidet Installation
For Every Types of Bidets, Japanese Toilets, Washlets, Shower Toilets and Smart Toilets
Lots Of Alternatives to Select From
Residential and also Commercial Solution

Please call (415) 818-1877 or complete our basic contact form and also tell us regarding your bidet installation requirements. We will get back to you today.

What are the benefits of using a Bidet?

Bidets have actually been used in Europe for years and also have actually started to expand in appeal in the U.S. While adding a freestanding bidet to your home calls for dedicated pipes lines, bidet toilet seats and also portable bidet sprayers are easy to set up and also need extremely little area in your washroom.

With a bidet, you do not require bathroom tissue after utilizing the toilet since the bidet does the cleaning for you. For some individuals, this hassle-free and also green enhancement to the washroom is a positive experience.

Bidets are available in many designs and also 2 configurations, oval and also extended. Most of the bidet seats on the marketplace today make use of electrical energy to supply high end, high end attributes. There are some basic requirements and also referrals to comply with when mounting an electrical bidet toilet seat, as it associates with the outlet (see our electric referrals page). If your outlet does not meet these referrals, you will require to get an electrician bent on make the needed changes.

They may need pipes changes to your washroom, which brings about differing costs. This has an average range of $500 to $1,500 for adding a ceramic floor-mounted bidet to a shower room, with most people paying around $1,000 total.

This task’s low cost is around $400 for a basic bidet installed in a shower room with existing pipes. The high cost is around $2,500 for a wall-mounted bidet in a shower room that requires extensive pipes and also surface job.

Plumbing Needs of a Bidet

Due to the fact that bidets have mixing shutoffs similar to faucets that allow you to adjust the rinse water to a comfy temperature level, one more demand is both a warm and also cold-water supply. In addition, the pipes code requires what’s called a “vacuum breaker” to be used with bidet products.

Vacuum breakers protect against water from being siphoned back into the supply system and also causing contamination. The majority of bidets have an indispensable vacuum breaker, yet it’s clever to confirm this prior to you purchase your bidet. If one is lacking, rather than standard turned off at the wall, you can purchase ones that have a vacuum breaker.

An additional difference in between mounting a bidet and also mounting a toilet is the size and also configuration of the waste line. W.c.s have inner traps to prevent sewer gases from leaving into busy rooms. Bidets do not, and also a trap should be installed in the rough pipes below| the floor. Likewise, due to the fact that bidets are utilized for washing just and also except strong waste, their drains pipes are commonly just 1 1/2 inch in size, contrasted to the 3-inch drainpipe pipelines most toilets make use of. As a matter of fact, the drainpipe setting up for a bidet is extra like that for a shower or bath tub than a toilet.

Installing Wall- and also Floor-Mounted Bidets

Wall-mounted bidets need a special structure to be installed in the wall prior to drywall and also tile. Mounting screws affixed to this structure protrude from the wall, and all the pipes connections are made at the wall. An unique drainpipe connection is used that seals when the drainpipe from the bidet is pushed in. The drainpipe of a floor-mounted bidet is always in the floor, yet the products might come out of the floor or the wall. In every instance, it is essential to assess the pipes design in the bidet’s installation instructions and also make sure the harsh pipes is specifically where it’s expected to be.

With the floor and also wall surfaces completed and also the quit shutoffs installed on the rough pipes products, you can start to in fact set up the bidet now. The location of a wall-mounted unit is determined by the previously installed screws.

Floor-mounted devices are attached utilizing hanger screws, which have a lag string on one end and also a device string on the various other. Situate and also predrill the holes for these screws utilizing a theme (if one is supplied) or by placing the bidet so its drainpipe hole lines up with the trap and also drain in the floor.

Because installation procedures vary for different bidets, see to it to review the producer’s instructions prior to you begin. In most cases, it’s much easier to lay out and also set up supply lines prior to installing the bidet to wall or floor.

Wall-mounted bides are harder to set up after that floor-mounted designs. Some wall-mounted devices have unique hardware that threads onto the screws prior to the bidet is placed, while others simply make use of nuts and also washing machines. In either instance, you’ll be supporting the bidet from above while protecting the installing screws by feeling from listed below. As you’re positioning the bidet on the screws, the drainpipe should be aligned with that said in the rough pipes, and also every little thing is pushed home at once. A helper can make a difference here.

Floor-mounted bidets are placed over the screws you have actually threaded into the floor and also held down with nuts and also washing machines, just like a toilet. The drainpipe setting up is placed into the hole in the bidet from above, and also the drainpipe connections are tightened up using an access hole in the rear of the bidet.

The final steps are affixing the adaptable products to the shutoffs. Look for leakages, repair any type of you may locate, and then caulk the bidet to the wall or floor with a neat grain of silicone sealant.

The Bidet Seat Alternative

If you do not have area for a committed unit, a bidet-seat for your toilet is a choice. There are 2 common snags. First, bidets make use of more water than toilets do, so standard 3/8-inch toilet shutoffs have to be changed with 1/2-inch ones. This may need knowing just how to solder pipe. Second, due to the fact that there won’t be a warm water supply at the toilet, bidet-seats have important electric heating systems. There requires to be a GFCI-protected outlet nearby.

If you have those things, after that the installation is a matter of removing the existing toilet seat and also mounting the base for the bidet-seat in its area. Water is attached to the base from the shut-off using a flexible supply, and also the heating system is connected in.

After that, the bidet seat is placed to its base according to that producer’s instructions.

Bidet Installation Rates in Henderson

National ordinary cost $1,000.
Typical range $500-$1,500.
Minimum cost $400.
Maximum cost $2,500.

Bidet Installation Expense by Project Range

Bidet Installation Prices

Low $400
A basic bidet in a shower room currently plumbed, installed.

Typical Expense $1,000
A floor-mounted bidet with the necessary pipes expansion, installed.

Maximum cost $2,500
A wall-mounted bidet with a substantial pipes expansion and also surface job, installed.

What is a Bidet, Japanese Toilet, Washlet, Shower Toilet or Smart Toilet?

At its easiest, a bidet is a bowl-shaped seat with faucets to clean after utilizing the toilet. A bidet can get you cleaner than bathroom tissue and also is extra environmentally friendly than various other approaches. Bidets can be placed on your floor or wall, and also some toilets have built-in bidets or toilet seats with bidet attributes. A conventional bidet is made from ceramic and also created to be straddled, with the customer facing the rear of the component.

Floor-Mounted Bidets in San Mateo County, California

Floor-mounted bidets are the most common design. Like floor-mounted toilets, they normally receive water from the wall and also drainpipe via the floor. The floor holds the weight with a floor-mounted bidet, so beyond the water attach and also the drainpipe, the installation is basic. As soon as the pipes is done, the bidet is embeded in area and also bolted to the floor. This likewise makes substitutes easy due to the fact that the old bidet can be taken off and also a new one put down in minutes if the pipes is in good condition. These designs cost in between $200 and also $600 typically.

Wall-Mounted Bidets in San Mateo County, California

Wall-mounted bidets are great for contemporary shower rooms. They do not interrupt the floor’s aesthetic, so it can make a small washroom appearance larger. Also some customers find it easier to clean.

Like wall-mounted toilets, a wall-mounted bidet takes extra effort to set up. This is due to the fact that the wall requires to be opened up and also a carrier installed in the wall in between the studs. This holds the weight of the bidet and also the person.

The wall should be redecorated after the bidet is installed. The ordinary rate for a wall-mounted bidet is in between $300 and also $700 typically.

Bidet Installation Expense in 94303 Henderson, California

Assuming that your design can conveniently accommodate a bidet, the installation procedure mainly includes the component’s pipes. You require a water line installed where the bidet is, and also the bidet’s drainpipe should be attached to the pipes system. This may suggest opening the wall, floor, or both in close proximity to where the bidet will be installed. When opening up the floor, the bidet normally covers the opening, yet the wall may require to be patched or repainted.

Relying on just how much the pipelines should be run and also just how hard the wall and also floor materials are to puncture, the entire procedure takes around 2 to 3 hrs typically.

Bidets are installed by plumbing technicians billing in between $45 and also $200 an hour for most work. Due to the fact that they require to run pipelines to the bidet, the work can be basic or hard, depending upon just how much the pipelines should run. If you have to reroute various other components to accommodate the bidet or the pipes is old and also requires updating, this can elevate your costs considerably. For a common bidet installation of 2 to 3 hrs, the labor costs vary from $250 to $600, with most people paying around $500 for installation out of the $1,000 total.

Bidet W.c. Seat Installation Expense in 94303 Henderson, California

Bidet toilet seats can be found in many designs. Some are meant to be installed conveniently Do It Yourself. In this instance, you require to loosen your toilet’s water supply, screw on the T couplet, and also set up the seat. If your bidet toilet seat requires a plumbing technician or electrical contractor to set up, expect costs in the range of $200 to $1,000. This array depends on your pipes and also electrical energy’s design and also how much of the walls the plumbing technician or electrical contractor requires to open. Due to the fact that most shower rooms do not have an electrical outlet next to the toilet and also most toilets are just plumbed for cold water, adding these attributes increases installation costs. The seat mounts conveniently in minutes, offered the area awaits the set up.

Water Closets with Integrated Bidets

A fairly new component on the marketplace is a toilet featuring an integrated bidet. Instead of a separate toilet and also bidet or a toilet with a seat that functions as a bidet, these are toilets with added attributes built-in.

Just like the bidet toilet seats, you can locate a toilet with an integrated bidet with many attributes. Some are basic, providing just the water spray, while others have actually incorporated MP3 players, warmed seats, deodorizers, and also extra. They are not as common as the various other options and also cost dramatically extra, around $1,000 – $1,200, yet they set up like a basic toilet and also do not require as much area. They need a nearby outlet to work, nevertheless.

Pros and Cons of a Bidet

Many people enjoy utilizing a bidet and also the ease it brings. There is no requirement for bathroom tissue with a bidet. So, you have reduced regular monthly costs, do not require to stress over the environmental effect of paper, and also may have less toilet blockages. Bidets are considered extra hygienic by some and also give a customized experience in the washroom.

Nonetheless, bidets use up a great deal of area. Every bidet calls for a minimum of 30 inches, with 36 inches being the suggested amount. It likewise requires to be installed near the toilet for best use, and also the toilet likewise calls for 30 to 36 inches. For a small washroom, adding a bidet may need significant restorations. Also in larger shower rooms, it may suggest relocating cabinets or various other pipes to much better accommodate the bidet.

Bidet Upkeep in 94303 Henderson, California

Bidets are easy to clean and also preserve. The ceramic is conveniently wiped down with a fabric and also washroom cleaner. Due to the fact that the bidet does not deal with strong waste, it is easy to keep clean and also much less most likely to tarnish.

Bidet toilet seats can likewise be wiped down with a soft, damp fabric as needed. Occasionally, a bidet seat or spray blockages from difficult water. If this occurs, soak the nozzle in vinegar to liquify the obstruction and also flush with clean water.