Select Page

If you would like to get a bidet installed in Belle Haven we can aid. Our friendly setup specialists can take care of all your requirements.

Bidet Installation Bay Area

  • Specialist Solution
  • Fast Reaction Time in San Mateo County, California
  • Bidet Installment
  • For All Types of Bidets, Japanese Toilets, Washlets, Shower Toilets and Smart Toilets
  • Many Choices to Select From
  • Residential and also Commercial Solution

Please call (415) 818-1877 or fill out our straightforward contact form and also tell us about your bidet setup requirements. We will certainly get back to you immediately.

What are the benefits of using a Bidet?

What are the benefits of using a Bidet? Bidets have been used in Europe for years and also have begun to grow in appeal in the U.S. While adding a free standing bidet to your house needs devoted pipes lines, bidet water closet seats and also handheld bidet sprayers are very easy to mount and also call for very little area in your bathroom.

With a bidet, you do not need water closet paper after making use of the water closet since the bidet does the cleansing for you. For some people, this convenient and also environmentally friendly addition to the bathroom is a favorable experience.

Bidets come in several styles and also 2 setups, oblong and also lengthened. A number of the bidet seats on the marketplace today make use of power to provide high-end, high-end attributes. There are some fundamental needs and also suggestions to follow when setting up an electrical bidet water closet seat, as it connects to the electrical outlet (see our electric suggestions page). If your electrical outlet does not meet these suggestions, you will certainly need to get an electrical expert bent on make the needed modifications.

They may call for pipes modifications to your bathroom, which results in differing expenses. This has a typical range of $500 to $1,500 for adding a ceramic floor-mounted bidet to a shower room, with most individuals paying around $1,000 overall.

This project’s low cost is around $400 for a basic bidet installed in a shower room with existing pipes. The high cost is around $2,500 for a wall-mounted bidet in a shower room that needs extensive pipes and also finish work.

Plumbing Needs of a Bidet

Plumbing Demands of a BidetDue to the fact that bidets have mixing shutoffs similar to taps that enable you to readjust the rinse water to a comfy temperature, an additional need is both a hot and also cold-water supply. In addition, the pipes code needs what’s called a “vacuum breaker” to be used with bidet products.

Vacuum breakers stop water from being siphoned back into the supply system and also triggering contamination. Most bidets have an important vacuum breaker, yet it’s wise to validate this prior to you purchase your bidet. If one is lacking, rather than common shut down at the wall surface, you can purchase ones that have a vacuum breaker.

An additional difference between setting up a bidet and also setting up a water closet is the dimension and also arrangement of the waste line. Water closets have inner traps to stop sewage system gases from escaping into busy areas. Bidets do not, and also a trap has to be installed in the rough pipes below| the floor. Also, due to the fact that bidets are used for washing only and also not for strong waste, their drains pipes are commonly only 1 1/2 inch in diameter, compared to the 3-inch drain pipes most toilets make use of. As a matter of fact, the drain setting up for a bidet is much more like that for a shower or tub than a water closet.

Setting up Wall- and also Floor-Mounted Bidets

Wall-mounted bidets call for a special structure to be installed in the wall surface prior to drywall and also floor tile. Mounting screws affixed to this structure protrude from the wall surface, and all the pipes connections are made at the wall surface. A special drain link is used that seals when the drain from the bidet is pushed in. The drain of a floor-mounted bidet is constantly in the floor, yet the products may appear of the floor or the wall surface. In every situation, it is essential to evaluate the pipes layout in the bidet’s setup instructions and also ensure the harsh pipes is specifically where it’s intended to be.

With the floor and also wall surfaces finished and also the stop shutoffs installed on the rough pipes products, you can begin to actually mount the bidet now. The area of a wall-mounted device is figured out by the previously installed screws.

Floor-mounted systems are attached making use of wall mount screws, which have a lag string on one end and also a device string on the other. Situate and also predrill the holes for these screws making use of a design template (if one is supplied) or by placing the bidet so its drain opening lines up with the catch and also waste pipe in the floor.

Since setup treatments differ for different bidets, make certain to review the manufacturer’s instructions prior to you begin. In most cases, it’s simpler to set out and also mount supply lines prior to installing the bidet to wall surface or floor.

Wall-mounted bides are trickier to mount then floor-mounted versions. Some wall-mounted systems have special hardware that threads onto the screws prior to the bidet is mounted, while others simply make use of nuts and also washing machines. In either situation, you’ll be supporting the bidet from above while safeguarding the installing screws by feeling from below. As you’re putting the bidet on the screws, the drain has to be lined up keeping that in the rough pipes, and also whatever is pressed house at once. A helper can make a distinction right here.

Floor-mounted bidets are positioned over the screws you‘ve threaded into the floor and also held back with nuts and also washing machines, just like a water closet. The drain setting up is placed into the hole in the bidet from above, and also the drain connections are tightened up using an accessibility opening in the back of the bidet.

The final actions are attaching the flexible products to the shutoffs. Check for leaks, deal with any type of you may find, and afterwards caulk the bidet to the wall surface or floor with a neat bead of silicone sealant.

The Bidet Seat Alternative

Bidet Seat Choice If you do not have area for a devoted device, a bidet-seat for your water closet is an option. There are 2 common grabs. First, bidets make use of even more water than toilets do, so common 3/8-inch water closet shutoffs need to be changed with 1/2-inch ones. This may call for recognizing how to solder pipe. Second, due to the fact that there will not be a hot water supply at the water closet, bidet-seats have integral electrical heating units. There needs to be a GFCI-protected electrical outlet close by.

If you have those points, then the setup is a matter of getting rid of the existing water closet seat and also setting up the base for the bidet-seat in its area. Water is linked to the base from the shut-off via a versatile supply, and also the heating system is connected in.

Then, the bidet seat is mounted to its base according to that manufacturer’s instructions.

Bidet Installment Rates in Belle Haven

  • National typical cost $1,000.
  • Ordinary range $500-$1,500.
  • Lowest cost $400.
  • Highest cost $2,500.

Bidet Installment Expense by Task Range

Bidet Installation Prices

Minimum $400
A fundamental bidet in a shower room already plumbed, installed.

Ordinary Expense $1,000
A floor-mounted bidet with the needed pipes expansion, installed.

Highest cost $2,500
A wall-mounted bidet with an extensive pipes expansion and also finish work, installed.

What is a Bidet, Japanese Toilet, Washlet, Shower Toilet or Smart Toilet?

At its most basic, a bidet is a bowl-shaped seat with taps to clean after making use of the water closet. A bidet can get you cleaner than water closet paper and also is much more environmentally friendly than other approaches. Bidets can be mounted on your floor or wall surface, and also some toilets have integrated bidets or water closet seats with bidet attributes. A traditional bidet is made from ceramic and also made to be straddled, with the customer encountering the back of the component.

Floor-Mounted Bidets in San Mateo County, California

Floor-Mounted Bidet Floor-mounted bidets are the most common design. Like floor-mounted toilets, they normally get water from the wall surface and also drain via the floor. The floor holds the weight with a floor-mounted bidet, so beyond the water attach and also the drain, the setup is straightforward. As soon as the pipes is done, the bidet is set in area and also bolted to the floor. This likewise makes replacements very easy due to the fact that the old bidet can be lifted off and also a new one put down in mins if the pipes is in good condition. These versions cost between $200 and also $600 on average.

Wall-Mounted Bidets in San Mateo County, California

Wall-Mounted Bidets Wall-mounted bidets are excellent for modern restrooms. They do not disturb the floor’s aesthetic, so it can make a little bathroom look larger. Also a few people find it easier to keep clean.

Like wall-mounted toilets, a wall-mounted bidet takes much more effort to mount. This is due to the fact that the wall surface needs to be opened up and also a provider installed in the wall surface between the studs. This holds the weight of the bidet and also the user.

The wall surface has to be refinished after the bidet is installed. The typical rate for a wall-mounted bidet is between $300 and also $700 on average.

Bidet Installment Expense in 94303 Belle Haven, California

Thinking that your layout can quickly suit a bidet, the setup procedure mainly entails the component’s pipes. You need a water line installed where the bidet is, and also the bidet’s drain have to be linked to the pipes system. This may indicate opening up the wall surface, floor, or both near where the bidet will certainly be installed. When opening the floor, the bidet normally covers the opening, yet the wall surface may need to be covered or painted.

Depending on how much the pipes have to be run and also how tough the wall surface and also floor materials are to cut through, the whole procedure takes about 2 to 3 hours on average.

Bidets are installed by plumbing technicians charging between $45 and also $200 a hr for a lot of jobs. Due to the fact that they need to run pipes to the bidet, the job can be straightforward or tough, relying on how much the pipes have to run. If you need to reroute other components to suit the bidet or the pipes is old and also needs updating, this can increase your expenses substantially. For a regular bidet setup of 2 to 3 hours, the labor expenses range from $250 to $600, with most individuals paying around $500 for setup out of the $1,000 overall.

Bidet Toilet Seat Installment Expense in 94303 Belle Haven, California

Bidet water closet seats come in several styles. Some are meant to be installed quickly Do It Yourself. In this situation, you need to loosen your water closet’s water system, screw on the T couplet, and also mount the seat. If your bidet water closet seat needs a plumbing technician or electrician to mount, anticipate expenses in the variety of $200 to $1,000. This array depends upon your pipes and also power’s layout and also how much of the wall surfaces the plumbing or electrician needs to open. Due to the fact that a lot of restrooms do not have an electrical outlet beside the water closet and also most toilets are only plumbed for cold water, adding these attributes raises setup expenses. The seat installs quickly in mins, gave the location is ready for the mount.

Toilets with Integrated Bidets

A fairly new component on the marketplace is a water closet featuring an incorporated bidet. Rather than a separate water closet and also bidet or a water closet with a seat that functions as a bidet, these are toilets with added attributes integrated.

Like the bidet water closet seats, you can find a water closet with an incorporated bidet with several attributes. Some are fundamental, offering just the water spray, while others have integrated MP3 players, heated seats, deodorizers, and also much more. They are not as common as the other choices and also cost dramatically much more, around $1,000 – $1,200, yet they mount like a typical water closet and also do not need as much area. They call for a close-by electrical outlet to function, nonetheless.

Pros and Cons of a Bidet

Many individuals appreciate making use of a bidet and also the comfort it brings. There is no requirement for water closet paper with a bidet. So, you have lower monthly expenditures, do not need to bother with the environmental effect of paper, and also may have less water closet blockages. Bidets are taken into consideration much more sanitary by some and also give a custom-made experience in the restroom.

Nonetheless, bidets take up a great deal of area. Every bidet needs a minimum of 30 inches, with 36 inches being the advised amount. It likewise needs to be installed near the water closet for best use, and also the water closet likewise needs 30 to 36 inches. For a little bathroom, adding a bidet may call for significant renovations. Also in larger restrooms, it may indicate relocating kitchen cabinetry or other pipes to much better suit the bidet.

Bidet Repairs in 94303 Belle Haven, California

Bidets are very easy to tidy and also preserve. The ceramic is quickly cleaned down with a towel and also bathroom cleaner. Due to the fact that the bidet does not deal with strong waste, it is very easy to keep tidy and also less likely to stain.

Bidet water closet seats can likewise be cleaned down with a soft, moist fabric as needed. Occasionally, a bidet seat or spray blockages from hard water. If this takes place, soak the nozzle in vinegar to liquify the clog and also flush with tidy water.

Belle Haven Bidet Installation

If you would like to get a bidet installed in Belle Haven we can aid. Our friendly setup specialists can take care of all your requirements.

  • Specialist Solution
  • Fast Reaction Time in San Mateo County
  • Bidet Installment
  • For All Types of Bidets, Japanese Toilets, Washlets, Shower Toilets and Smart Toilets
  • Many Choices to Select From
  • Residential and also Commercial Solution

Please fill out our straightforward contact form and also tell us about your bidet setup requirements. We will certainly get back to you immediately.

Other Service Areas:

Henderson, Menlo Oaks, East Palo Alto, The Willows, Ravenswood, Vintage Oaks, Lindenwood, Linfield Oaks, Crescent Park, Felton Gables