Select Page

If you would like to obtain a bidet mounted in San Antonio we can aid. Our skillful setup contractors can look after all your requirements.

Bidet Installation Bay Area

  • Expert Solution
  • Quick Reaction Time in Marin County, California
  • Bidet Installment
  • For Every Types of Bidets, Japanese Toilets, Washlets, Shower Toilets and Smart Toilets
  • Lots Of Choices to Pick From
  • Residential and Commercial Solution

Please call (415) 818-1877 or fill out our simple contact form and inform us about your bidet setup requirements. We will certainly reply you as soon as possible.

What are the benefits of using a Bidet?

What are the benefits of using a Bidet? Bidets have actually been used in Europe for years and have actually begun to expand in popularity in San Antonio. While adding a free standing bidet to your home needs committed pipes lines, bidet water closet seats and portable bidet sprayers are very easy to set up and require very little area in your restroom.

With a bidet, you do not require toilet tissue after making use of the water closet considering that the bidet does the cleaning for you. For some individuals, this practical and environment-friendly addition to the restroom is a positive experience.

Bidets are available in many styles and 2 arrangements, oblong and lengthened. Much of the bidet seats on the market today make use of power to use luxury, luxury features. There are some standard demands and recommendations to comply with when setting up an electrical bidet water closet seat, as it associates with the electrical outlet (see our electric recommendations page). If your electrical outlet does not meet these recommendations, you will certainly require to obtain an electrician out to make the needed modifications.

They may require pipes modifications to your restroom, which brings about varying expenses. This has an average range of $500 to $1,500 for adding a ceramic floor-mounted bidet to a washroom, with lots of people paying around $1,000 total.

This task’s low cost is around $400 for a standard bidet mounted in a washroom with existing pipes. The high cost is around $2,500 for a wall-mounted bidet in a washroom that needs comprehensive pipes and coating job.

Plumbing Demands of a Bidet

Plumbing Demands of a BidetDue to the fact that bidets have blending shutoffs comparable to faucets that allow you to adjust the rinse water to a comfy temperature level, one more requirement is both a hot and cold-water supply. Additionally, the pipes code requires what’s called a “vacuum breaker” to be used with bidet products.

Vacuum breakers protect against water from being siphoned back right into the supply system and causing contamination. A lot of bidets have an integral vacuum breaker, but it’s clever to validate this before you acquire your bidet. If one is doing not have, as opposed to common turned off at the wall surface, you can acquire ones that have a vacuum breaker.

Another difference between setting up a bidet and setting up a toilet is the size and setup of the waste line. W.c.s have internal traps to stop drain gases from leaving right into occupied areas. Bidets do not, and a trap should be mounted in the rough pipes below| the floor. Additionally, because bidets are utilized for rinsing just and except solid waste, their drains are normally just 1 1/2 inch in size, contrasted to the 3-inch drain pipelines most water closets make use of. As a matter of fact, the drain setting up for a bidet is a lot more like that for a shower or bathtub than a toilet.

Installing Wall- and Floor-Mounted Bidets

Wall-mounted bidets require a special framework to be mounted in the wall surface before drywall and floor tile. Placing screws affixed to this framework protrude from the wall surface, and all the pipes links are made at the wall surface. A special drain link is used that seals when the drain from the bidet is pushed in. The drain of a floor-mounted bidet is always in the floor, but the products might appear of the floor or the wall surface. In every situation, it‘s important to evaluate the pipes format in the bidet’s setup instructions and make certain the harsh pipes is precisely where it’s intended to be.

With the floor and wall finishes finished and the quit shutoffs mounted on the rough pipes products, you can begin to in fact set up the bidet now. The area of a wall-mounted system is identified by the formerly mounted screws.

Floor-mounted devices are fastened making use of wall mount screws, which have a lag thread on one end and a device thread on the various other. Find and predrill the holes for these screws making use of a design template (if one is supplied) or by positioning the bidet so its drain hole aligns with the trap and waste pipe in the floor.

Considering that setup procedures differ for various bidets, ensure to check out the producer’s instructions before you start. In many cases, it’s simpler to set out and set up supply lines before installing the bidet to wall surface or floor.

Wall-mounted bides are trickier to set up then floor-mounted models. Some wall-mounted devices have unique equipment that threads onto the screws before the bidet is mounted, while others just make use of nuts and washers. In either situation, you’ll be supporting the bidet from over while securing the installing screws by feel from listed below. As you’re putting the bidet on the screws, the drain should be lined up keeping that in the rough pipes, and everything is pushed home at the same time. A helper can make a difference below.

Floor-mounted bidets are placed over the screws you‘ve threaded right into the floor and held back with nuts and washers, much like a toilet. The drain setting up is placed into the hole in the bidet from above, and the drain links are tightened up by way of an accessibility hole in the rear of the bidet.

The final steps are affixing the adaptable products to the shutoffs. Check for leakages, fix any kind of you may locate, and then caulk the bidet to the wall surface or floor with a cool bead of silicone sealer.

The Bidet Seat Alternative

Bidet Seat Choice If you do not have room for a specialized system, a bidet-seat for your water closet is a choice. There are 2 usual snags. Initially, bidets make use of more water than water closets do, so common 3/8-inch water closet shutoffs have to be changed with 1/2-inch ones. This may require understanding how to solder pipeline. Second, because there will not be a warm water supply at the water closet, bidet-seats have essential electrical heating units. There needs to be a GFCI-protected electrical outlet close by.

If you have those points, then the setup is a matter of eliminating the existing water closet seat and setting up the base for the bidet-seat in its area. Water is connected to the base from the shut-off via an adaptable supply, and the heating system is plugged in.

Then, the bidet seat is mounted to its base according to that producer’s instructions.

Bidet Installment Prices in San Antonio

  • National ordinary cost $1,000.
  • Typical range $500-$1,500.
  • Lowest cost $400.
  • Highest cost $2,500.

Bidet Installment Expense by Task Range

Bidet Installation Prices

Minimum $400
A standard bidet in a washroom already plumbed, mounted.

Typical Expense $1,000
A floor-mounted bidet with the essential pipes extension, mounted.

Highest cost $2,500
A wall-mounted bidet with a considerable pipes extension and coating job, mounted.

What is a Bidet, Japanese Toilet, Washlet, Shower Toilet or Smart Toilet?

At its easiest, a bidet is a bowl-shaped seat with faucets to wash after making use of the water closet. A bidet can obtain you cleaner than toilet tissue and is a lot more eco-friendly than various other approaches. Bidets can be mounted on your floor or wall surface, and some water closets have built-in bidets or water closet seats with bidet features. A traditional bidet is made from ceramic and designed to be straddled, with the user facing the rear of the fixture.

Floor-Mounted Bidets in Marin County, California

Floor-Mounted Bidets Floor-mounted bidets are one of the most usual design. Like floor-mounted water closets, they normally get water from the wall surface and drain via the floor. The floor holds the weight with a floor-mounted bidet, so past the water link and the drain, the setup is simple. When the pipes is done, the bidet is set in area and bolted to the floor. This additionally makes substitutes very easy because the old bidet can be lifted off and a new one set down in minutes if the pipes is in good condition. These models cost between $200 and $600 usually.

Wall-Mounted Bidets in Marin County, California

Wall-Mounted Bidets Wall-mounted bidets are excellent for contemporary bathrooms. They do not disturb the floor’s aesthetic, so it can make a little restroom look bigger. Also a few customers find it easier to keep clean.

Like wall-mounted water closets, a wall-mounted bidet takes a lot more effort to set up. This is because the wall surface needs to be opened up and a carrier mounted in the wall surface between the studs. This holds the weight of the bidet and the human.

The wall surface should be refinished after the bidet is mounted. The ordinary cost for a wall-mounted bidet is between $300 and $700 usually.

Bidet Installment Expense in 94948 San Antonio, California

Thinking that your format can quickly accommodate a bidet, the setup procedure mainly entails the fixture’s pipes. You require a water line installed where the bidet is, and the bidet’s drain need to be connected to the pipes system. This may indicate opening the wall surface, floor, or both near where the bidet will certainly be mounted. When opening up the floor, the bidet normally covers the opening, but the wall surface may require to be covered or painted.

Depending on how far the pipelines need to be run and how challenging the wall surface and floor materials are to puncture, the entire procedure takes about 2 to 3 hrs usually.

Bidets are mounted by plumbing professionals charging between $45 and $200 an hour for most jobs. Due to the fact that they require to run pipelines to the bidet, the work can be simple or challenging, depending upon how far the pipelines need to run. If you have to reroute various other components to accommodate the bidet or the pipes is old and needs updating, this can raise your expenses considerably. For an average bidet setup of 2 to 3 hrs, the labor expenses vary from $250 to $600, with lots of people paying around $500 for setup out of the $1,000 total.

Bidet Toilet Seat Installment Expense in 94948 San Antonio, California

Bidet water closet seats can be found in many styles. Some are implied to be mounted quickly Do It Yourself. In this situation, you require to unscrew your water closet’s water, screw on the T couplet, and set up the seat. If your bidet water closet seat needs a plumbing technician or electrical expert to set up, anticipate expenses in the range of $200 to $1,000. This array depends upon your pipes and power’s format and how much of the walls the plumbing or electrical expert needs to open up. Due to the fact that most bathrooms do not have an outlet close to the water closet and most water closets are just plumbed for cold water, adding these features elevates setup expenses. The seat installs quickly in minutes, offered the area is ready for the set up.

W.C.s with Integrated Bidets

A fairly new fixture on the market is a toilet including an incorporated bidet. As opposed to a different water closet and bidet or a toilet with a seat that functions as a bidet, these are water closets with additional features built-in.

Just like the bidet water closet seats, you can locate a toilet with an incorporated bidet with many features. Some are standard, using simply the water spray, while others have actually integrated MP3 players, warmed seats, deodorizers, and a lot more. They are not as usual as the various other options and cost significantly a lot more, around $1,000 – $1,200, but they set up like a standard water closet and do not require as much area. They require a close-by electrical outlet to operate, nevertheless.

Advantages and disadvantages of a Bidet

Lots of people take pleasure in making use of a bidet and the benefit it brings. There is no need for toilet tissue with a bidet. So, you have reduced monthly costs, do not require to bother with the ecological influence of paper, and may have less water closet clogs. Bidets are considered a lot more sanitary by some and provide a customized experience in the bathroom.

Nevertheless, bidets use up a lot of area. Every bidet needs a minimum of 30 inches, with 36 inches being the advised amount. It additionally needs to be mounted near the water closet for ideal use, and the water closet additionally needs 30 to 36 inches. For a little restroom, adding a bidet may require significant renovations. Even in bigger bathrooms, it may indicate transferring kitchen cabinetry or various other pipes to much better accommodate the bidet.

Bidet Maintenance in 94948 San Antonio, California

Bidets are very easy to tidy and keep. The ceramic is quickly wiped down with a towel and restroom cleaner. Due to the fact that the bidet does not handle solid waste, it is very easy to maintain tidy and much less most likely to discolor.

Bidet water closet seats can additionally be wiped down with a soft, moist towel as needed. Sometimes, a bidet seat or spray clogs from tough water. If this happens, soak the nozzle in vinegar to dissolve the obstruction and flush with tidy water.

Bidet setup contractors in San Antonio

If you would like to obtain a bidet mounted in San Antonio we can aid. Our skillful setup contractors can look after all your requirements.

  • Expert Solution
  • Quick Reaction Time in Marin County
  • Bidet Installment
  • For Every Types of Bidets, Japanese Toilets, Washlets, Shower Toilets and Smart Toilets
  • Lots Of Choices to Pick From
  • Residential and Commercial Solution

Please fill out our simple contact form and inform us about your bidet setup requirements. We will certainly reply you as soon as possible.

Other Service Areas:

Burdell, Novato, Old Town, Black Point-Green Point, Black Point, Bel Marin Keys, Rafael Village, Ignacio, Dewitt, Lucas Valley-Marinwood