If you wish to get a bidet installed in Cordelia Junction we can assist. Our skillful installment service providers can take care of all your needs.

Bidet Installation Bay Area

Specialist Solution
Rapid Feedback Time in Solano County, California
Bidet Setup
For All Kinds of Bidets, Japanese Toilets, Washlets, Shower Toilets and Smart Toilets
Several Choices to Pick From
Residential and Commercial Solution

Please call (415) 818-1877 or fill out our basic contact form and tell us about your bidet installment needs. We will reply you as soon as possible.

What are the benefits of using a Bidet?

Bidets have actually been utilized in Europe for decades and have actually begun to grow in popularity in the U.S. While including a freestanding bidet to your residence needs devoted plumbing lines, bidet water closet seats and portable bidet sprayers are easy to set up and call for extremely little room in your shower room.

With a bidet, you do not need bathroom tissue after utilizing the water closet because the bidet does the cleaning for you. For some people, this hassle-free and eco-friendly enhancement to the shower room is a favorable experience.

Bidets can be found in many styles and 2 setups, oblong and lengthened. Most of the bidet seats on the marketplace today utilize electricity to use high end, high end functions. There are some basic requirements and referrals to follow when mounting an electrical bidet water closet seat, as it connects to the outlet (see our electric referrals web page). If your outlet does not fulfill these referrals, you will need to get an electrical expert out to make the needed modifications.

They may call for plumbing adjustments to your shower room, which leads to varying prices. This has an ordinary range of $500 to $1,500 for including a ceramic floor-mounted bidet to a washroom, with lots of people paying around $1,000 total.

This job’s low cost is around $400 for a basic bidet installed in a washroom with existing plumbing. The high expense is around $2,500 for a wall-mounted bidet in a washroom that needs considerable plumbing and surface work.

Plumbing Needs of a Bidet

Due to the fact that bidets have blending shutoffs similar to faucets that enable you to readjust the rinse water to a comfy temperature level, another requirement is both a hot and cold-water supply. Additionally, the plumbing code needs what’s called a “vacuum breaker” to be utilized with bidet supplies.

Vacuum breakers prevent water from being siphoned back into the supply system and creating contamination. Most bidets have an important vacuum breaker, but it’s wise to verify this before you purchase your bidet. If one is lacking, instead of typical turned off at the wall surface, you can purchase ones that have a vacuum breaker.

Another distinction in between mounting a bidet and mounting a toilet is the size and setup of the waste line. Toilets have internal traps to avoid drain gases from getting away into busy spaces. Bidets don’t, and a trap must be installed in the rough plumbing below| the floor. Additionally, due to the fact that bidets are used for washing only and except strong waste, their drains are typically only 1 1/2 inch in diameter, compared to the 3-inch drain pipelines most w.c.s utilize. Actually, the drain setting up for a bidet is a lot more like that for a shower or bathtub than a toilet.

Installing Wall- and Floor-Mounted Bidets

Wall-mounted bidets call for an unique framework to be installed in the wall surface before drywall and tile. Mounting screws connected to this framework protrude from the wall surface, and all the plumbing links are made at the wall surface. A special drain link is utilized that seals when the drain from the bidet is pushed in. The drain of a floor-mounted bidet is constantly in the floor, but the supplies could appear of the floor or the wall surface. In every case, it‘s important to assess the plumbing layout in the bidet’s installment guidelines and ensure the harsh plumbing is specifically where it’s expected to be.

With the floor and wall surfaces finished and the stop shutoffs installed on the rough plumbing supplies, you can start to really set up the bidet now. The area of a wall-mounted unit is identified by the previously installed screws.

Floor-mounted units are attached utilizing hanger screws, which have a lag thread on one end and a device thread on the other. Locate and predrill the holes for these screws utilizing a theme (if one is supplied) or by placing the bidet so its drain hole lines up with the catch and waste pipe in the floor.

Considering that installment procedures vary for various bidets, make certain to review the manufacturer’s guidelines before you start. Most of the times, it’s much easier to outline and set up supply lines before mounting the bidet to wall surface or floor.

Wall-mounted bides are harder to set up then floor-mounted models. Some wall-mounted units have special equipment that threads onto the screws before the bidet is mounted, while others simply utilize nuts and washing machines. In either case, you’ll be supporting the bidet from above while securing the mounting screws by feeling from below. As you’re positioning the bidet on the screws, the drain must be straightened keeping that in the rough plumbing, and every little thing is pushed residence at the same time. A helper can make a difference right here.

Floor-mounted bidets are placed over the screws you‘ve threaded into the floor and held back with nuts and washing machines, just like a toilet. The drain setting up is placed into the hole in the bidet from above, and the drain links are tightened up by way of an accessibility hole in the back of the bidet.

The last steps are connecting the flexible supplies to the shutoffs. Check for leakages, deal with any you may discover, and after that caulk the bidet to the wall surface or floor with a neat bead of silicone sealant.

The Bidet Seat Choice

If you don’t have area for a committed unit, a bidet-seat for your water closet is a choice. There are 2 common grabs. Initially, bidets utilize even more water than w.c.s do, so typical 3/8-inch water closet shutoffs need to be changed with 1/2-inch ones. This may call for understanding just how to solder pipe. Second, due to the fact that there will not be a hot water supply at the water closet, bidet-seats have indispensable electrical heating units. There needs to be a GFCI-protected outlet close by.

If you have those things, then the installment refers removing the existing water closet seat and mounting the base for the bidet-seat in its location. Water is connected to the base from the shut-off using a flexible supply, and the heating system is plugged in.

Then, the bidet seat is mounted to its base according to that manufacturer’s guidelines.

Bidet Setup Costs in Cordelia Junction

National average expense $1,000.
Average range $500-$1,500.
Lowest expense $400.
Highest expense $2,500.

Bidet Setup Cost by Task Range

Bidet Installation Costs

Low $400
A standard bidet in a washroom already plumbed, installed.

Average Cost $1,000
A floor-mounted bidet with the required plumbing expansion, installed.

Highest expense $2,500
A wall-mounted bidet with a considerable plumbing expansion and surface work, installed.

What is a Bidet, Japanese Toilet, Washlet, Shower Toilet or Smart Toilet?

At its simplest, a bidet is a bowl-shaped seat with faucets to clean after utilizing the water closet. A bidet can get you cleaner than bathroom tissue and is a lot more eco-friendly than other methods. Bidets can be mounted on your floor or wall surface, and some w.c.s have integrated bidets or water closet seats with bidet functions. A typical bidet is made from ceramic and made to be straddled, with the customer dealing with the back of the component.

Floor-Mounted Bidets in Solano County, California

Floor-mounted bidets are one of the most common style. Like floor-mounted w.c.s, they typically receive water from the wall surface and drain with the floor. The floor holds the weight with a floor-mounted bidet, so beyond the water link and the drain, the installment is basic. Once the plumbing is done, the bidet is embeded in location and bolted to the floor. This also makes replacements easy due to the fact that the old bidet can be lifted off and a new one set down in minutes if the plumbing remains in good condition. These models expense in between $200 and $600 generally.

Wall-Mounted Bidets in Solano County, California

Wall-mounted bidets are great for modern restrooms. They do not interrupt the floor’s aesthetic, so it can make a tiny shower room look bigger. Also a few customers find it more comfortable to clean.

Like wall-mounted w.c.s, a wall-mounted bidet takes a lot more work to set up. This is due to the fact that the wall surface needs to be opened and a service provider installed in the wall surface in between the studs. This holds the weight of the bidet and the individual.

The wall surface must be redecorated after the bidet is installed. The average rate for a wall-mounted bidet is in between $300 and $700 generally.

Bidet Setup Cost in 94534 Cordelia Junction, California

Thinking that your layout can conveniently accommodate a bidet, the installment process mostly entails the component’s plumbing. You need a water line brought to where the bidet is, and the bidet’s drain should be connected to the plumbing system. This may imply opening the wall surface, floor, or both close to where the bidet will be installed. When opening the floor, the bidet typically covers the opening, but the wall surface may need to be patched or repainted.

Depending on just how far the pipelines should be run and just how difficult the wall surface and floor products are to cut through, the whole process takes around 2 to 3 hours generally.

Bidets are installed by plumbing professionals billing in between $45 and $200 an hour for most work. Due to the fact that they need to run pipelines to the bidet, the work can be basic or difficult, depending on just how far the pipelines should run. If you need to reroute other components to accommodate the bidet or the plumbing is old and needs upgrading, this can increase your prices substantially. For a normal bidet installment of 2 to 3 hours, the labor prices range from $250 to $600, with lots of people paying around $500 for installment out of the $1,000 total.

Bidet W.c. Seat Setup Cost in 94534 Cordelia Junction, California

Bidet water closet seats been available in many styles. Some are meant to be installed conveniently Do It Yourself. In this case, you need to loosen your water closet’s water system, screw on the T couplet, and set up the seat. If your bidet water closet seat needs a plumber or electrical contractor to set up, anticipate prices in the series of $200 to $1,000. This array depends upon your plumbing and electricity’s layout and just how much of the walls the plumber or electrical contractor needs to open up. Due to the fact that most restrooms do not have an outlet beside the water closet and most w.c.s are only plumbed for cold water, including these functions increases installment prices. The seat mounts conveniently in minutes, supplied the location awaits the set up.

Toilets with Integrated Bidets

A relatively new component on the marketplace is a toilet including an integrated bidet. Rather than a separate water closet and bidet or a toilet with a seat that functions as a bidet, these are w.c.s with extra functions integrated.

Just like the bidet water closet seats, you can discover a toilet with an integrated bidet with many functions. Some are basic, providing simply the water spray, while others have actually integrated MP3 players, heated seats, deodorizers, and a lot more. They are not as common as the other choices and expense substantially a lot more, around $1,000 – $1,200, but they set up like a basic water closet and do not need as much room. They call for a neighboring outlet to function, nevertheless.

Benefits and drawbacks of a Bidet

Lots of people delight in utilizing a bidet and the ease it brings. There is no requirement for bathroom tissue with a bidet. So, you have lower regular monthly expenses, do not need to bother with the ecological influence of paper, and may have fewer water closet obstructions. Bidets are thought about a lot more sanitary by some and supply a customized experience in the bathroom.

Nevertheless, bidets take up a great deal of room. Every bidet needs a minimum of 30 inches, with 36 inches being the recommended amount. It also needs to be installed near the water closet for finest use, and the water closet also needs 30 to 36 inches. For a tiny shower room, including a bidet may call for major restorations. Also in bigger restrooms, it may imply transferring cabinetry or other plumbing to much better accommodate the bidet.

Bidet Repairs in 94534 Cordelia Junction, California

Bidets are easy to clean and repair. The ceramic is conveniently wiped down with a fabric and shower room cleaner. Due to the fact that the bidet does not deal with strong waste, it is easy to keep clean and much less most likely to tarnish.

Bidet water closet seats can also be wiped down with a soft, damp fabric as needed. Sometimes, a bidet seat or spray obstructions from tough water. If this happens, saturate the nozzle in vinegar to liquify the obstruction and flush with clean water.