If you would like to obtain a bidet set up in Avon we can help. Our friendly setup contractors can take care of all your needs.

Bidet Installation Bay Area

Professional Solution
Rapid Response Time in Contra Costa County, California
Bidet Installment
For Every Types of Bidets, Japanese Toilets, Washlets, Shower Toilets and Smart Toilets
Numerous Alternatives to Choose From
Residential and Commercial Solution

Please call (415) 818-1877 or submit our basic contact form and inform us about your bidet setup needs. We will certainly reply you as soon as possible.

What are the benefits of using a Bidet?

Bidets have been used in Europe for years and have begun to grow in appeal in the United States. While including a free standing bidet to your house calls for specialized plumbing lines, bidet water closet seats and portable bidet sprayers are very easy to mount and call for extremely little area in your shower room.

With a bidet, you do not need toilet tissue after using the water closet considering that the bidet does the cleaning for you. For some people, this hassle-free and environment-friendly addition to the shower room is a positive experience.

Bidets can be found in many designs and 2 configurations, oblong and extended. Most of the bidet seats on the market today utilize power to use high-end, high-end functions. There are some standard demands and suggestions to follow when mounting an electric bidet water closet seat, as it connects to the outlet (see our electrical suggestions page). If your outlet does not fulfill these suggestions, you will certainly need to obtain an electrical contractor out to make the needed adjustments.

They might call for plumbing changes to your shower room, which causes differing prices. This has an average range of $500 to $1,500 for including a ceramic floor-mounted bidet to a washroom, with the majority of people paying around $1,000 total amount.

This job’s low cost is around $400 for a basic bidet set up in a washroom with existing plumbing. The high cost is around $2,500 for a wall-mounted bidet in a washroom that requires comprehensive plumbing and coating work.

Plumbing Needs of a Bidet

Due to the fact that bidets have mixing valves similar to taps that allow you to adjust the rinse water to a comfortable temperature level, an additional need is both a hot and cold-water supply. Additionally, the plumbing code requires what’s called a “vacuum breaker” to be used with bidet products.

Vacuum breakers stop water from being siphoned back right into the supply system and triggering contamination. A lot of bidets have an important vacuum breaker, but it’s clever to verify this before you purchase your bidet. If one is doing not have, as opposed to typical shut offs at the wall surface, you can purchase ones that have a vacuum breaker.

Another distinction between mounting a bidet and mounting a water closet is the dimension and configuration of the waste line. Water closets have inner traps to prevent drain gases from running away right into busy areas. Bidets don’t, and a trap has to be set up in the rough plumbing below| the floor. Also, due to the fact that bidets are utilized for washing only and not for strong waste, their drains are commonly only 1 1/2 inch in size, compared to the 3-inch drain pipes most w.c.s utilize. As a matter of fact, the drain assembly for a bidet is more like that for a shower or bathtub than a water closet.

Putting up Wall- and Floor-Mounted Bidets

Wall-mounted bidets call for a special framework to be set up in the wall surface prior to drywall and tile. Installing screws attached to this framework protrude from the wall surface, and all the plumbing connections are made at the wall surface. A special drain connection is used that seals when the drain from the bidet is pushed in. The drain of a floor-mounted bidet is always in the floor, but the products could come out of the floor or the wall surface. In every instance, it‘s important to review the plumbing design in the bidet’s setup directions and make certain the harsh plumbing is specifically where it’s supposed to be.

With the floor and wall finishes completed and the stop valves set up on the rough plumbing products, you can start to actually mount the bidet now. The location of a wall-mounted system is established by the formerly set up screws.

Floor-mounted units are attached using wall mount screws, which have a lag thread on one end and a device thread on the other. Locate and predrill the holes for these screws using a theme (if one is provided) or by placing the bidet so its drain opening straightens with the catch and waste pipe in the floor.

Because setup procedures differ for different bidets, see to it to check out the producer’s directions before you start. For the most part, it’s easier to lay out and mount supply lines before installing the bidet to wall surface or floor.

Wall-mounted bides are harder to mount then floor-mounted designs. Some wall-mounted units have unique equipment that threads onto the screws before the bidet is mounted, while others just utilize nuts and washing machines. In either instance, you’ll be supporting the bidet from above while protecting the installing screws by feeling from listed below. As you’re placing the bidet on the screws, the drain has to be straightened keeping that in the rough plumbing, and everything is pushed house at once. An assistant can make a difference right here.

Floor-mounted bidets are put over the screws you have actually threaded right into the floor and held down with nuts and washing machines, just like a water closet. The drain assembly is placed into the hole in the bidet from above, and the drain connections are tightened up using a gain access to opening in the rear of the bidet.

The final steps are attaching the versatile products to the shutoffs. Check for leakages, take care of any type of you might discover, and after that caulk the bidet to the wall surface or floor with a cool grain of silicone sealer.

The Bidet Seat Alternative

If you don’t have space for a dedicated system, a bidet-seat for your water closet is an option. There are 2 usual grabs. Initially, bidets utilize more water than w.c.s do, so typical 3/8-inch water closet shutoffs need to be replaced with 1/2-inch ones. This might call for recognizing just how to solder pipe. Second, due to the fact that there won’t be a warm water supply at the water closet, bidet-seats have important electric heating systems. There requires to be a GFCI-protected outlet nearby.

If you have those points, then the setup refers getting rid of the existing water closet seat and mounting the base for the bidet-seat in its location. Water is connected to the base from the shut-off using a versatile supply, and the heating unit is plugged in.

Then, the bidet seat is mounted to its base according to that producer’s directions.

Bidet Installment Prices in Avon

National typical cost $1,000.
Ordinary range $500-$1,500.
Lowest cost $400.
Maximum cost $2,500.

Bidet Installment Cost by Project Range

Bidet Installation Prices

Low $400
A standard bidet in a washroom currently plumbed, set up.

Ordinary Cost $1,000
A floor-mounted bidet with the needed plumbing extension, set up.

Maximum cost $2,500
A wall-mounted bidet with a considerable plumbing extension and coating work, set up.

What is a Bidet, Japanese Toilet, Washlet, Shower Toilet or Smart Toilet?

At its most basic, a bidet is a bowl-shaped seat with taps to wash after using the water closet. A bidet can obtain you cleaner than toilet tissue and is more eco-friendly than other techniques. Bidets can be mounted on your floor or wall surface, and some w.c.s have integrated bidets or water closet seats with bidet functions. A standard bidet is made from ceramic and made to be straddled, with the customer facing the rear of the fixture.

Floor-Mounted Bidets in Contra Costa County, California

Floor-mounted bidets are the most usual design. Like floor-mounted w.c.s, they generally obtain water from the wall surface and drain through the floor. The floor holds the weight with a floor-mounted bidet, so beyond the water connect and the drain, the setup is basic. When the plumbing is done, the bidet is set in location and bolted to the floor. This additionally makes substitutes very easy due to the fact that the old bidet can be lifted off and a new one put down in mins if the plumbing is in good condition. These designs cost between $200 and $600 on average.

Wall-Mounted Bidets in Contra Costa County, California

Wall-mounted bidets are terrific for contemporary washrooms. They do not interrupt the floor’s aesthetic, so it can make a small shower room appearance bigger. Also a few customers find it easier to clean.

Like wall-mounted w.c.s, a wall-mounted bidet takes more work to mount. This is due to the fact that the wall surface requires to be opened up and a carrier set up in the wall surface between the studs. This holds the weight of the bidet and the human.

The wall surface has to be redecorated after the bidet is set up. The typical price for a wall-mounted bidet is between $300 and $700 on average.

Bidet Installment Cost in 94520 Avon, California

Presuming that your design can easily fit a bidet, the setup procedure mostly includes the fixture’s plumbing. You need a water line brought to where the bidet is, and the bidet’s drain need to be connected to the plumbing system. This might suggest opening the wall surface, floor, or both in close proximity to where the bidet will certainly be set up. When opening the floor, the bidet generally covers the opening, but the wall surface might need to be patched or repainted.

Relying on just how much the pipes need to be run and just how hard the wall surface and floor products are to cut through, the entire procedure takes around 2 to 3 hours on average.

Bidets are set up by plumbing technicians charging between $45 and $200 a hr for the majority of tasks. Due to the fact that they need to run pipes to the bidet, the job can be basic or hard, depending upon just how much the pipes need to run. If you need to reroute other fixtures to fit the bidet or the plumbing is old and requires upgrading, this can increase your prices considerably. For a common bidet setup of 2 to 3 hours, the labor prices vary from $250 to $600, with the majority of people paying around $500 for setup out of the $1,000 total amount.

Bidet Water Closet Seat Installment Cost in 94520 Avon, California

Bidet water closet seats been available in many designs. Some are implied to be set up easily DIY. In this instance, you need to loosen your water closet’s water, screw on the T couplet, and mount the seat. If your bidet water closet seat requires a plumbing professional or electrician to mount, expect prices in the variety of $200 to $1,000. This array depends upon your plumbing and power’s design and how much of the wall surfaces the plumber or electrician requires to open up. Due to the fact that the majority of washrooms do not have an outlet next to the water closet and most w.c.s are only plumbed for cold water, including these functions elevates setup prices. The seat installs easily in mins, provided the location is ready for the mount.

Toilets with Integrated Bidets

A fairly brand-new fixture on the market is a water closet including an incorporated bidet. Instead of a separate water closet and bidet or a water closet with a seat that operates as a bidet, these are w.c.s with additional functions integrated.

Just like the bidet water closet seats, you can discover a water closet with an incorporated bidet with many functions. Some are standard, providing just the water spray, while others have integrated MP3 players, heated seats, deodorizers, and more. They are not as usual as the other choices and cost considerably more, around $1,000 – $1,200, but they mount like a common water closet and do not need as much area. They call for a neighboring outlet to function, however.

Benefits and drawbacks of a Bidet

Many people delight in using a bidet and the ease it brings. There is no requirement for toilet tissue with a bidet. So, you have reduced regular monthly expenditures, do not need to worry about the ecological influence of paper, and might have less water closet blockages. Bidets are thought about more sanitary by some and supply a customized experience in the washroom.

Nonetheless, bidets occupy a lot of area. Every bidet calls for a minimum of 30 inches, with 36 inches being the advised quantity. It additionally requires to be set up near the water closet for finest use, and the water closet additionally calls for 30 to 36 inches. For a small shower room, including a bidet might call for significant renovations. Also in bigger washrooms, it might suggest relocating kitchen cabinetry or other plumbing to much better fit the bidet.

Bidet Repairs in 94520 Avon, California

Bidets are very easy to tidy and keep. The ceramic is easily cleaned down with a fabric and shower room cleaner. Due to the fact that the bidet does not handle strong waste, it is very easy to keep tidy and less most likely to stain.

Bidet water closet seats can additionally be cleaned down with a soft, damp towel as needed. In some cases, a bidet seat or spray blockages from difficult water. If this takes place, soak the nozzle in vinegar to dissolve the obstruction and flush with tidy water.